Artificial synthesis process and equipment application of flake graphite

The current production process of flake graphite is to produce graphite products from natural graphite ore through beneficiation, ball milling and flotation, and to provide a production process and equipment for artificially synthesizing flake graphite. The crushed graphite powder is resynthesized into large flake graphite to improve the utilization rate of graphite. The following Furuite graphite editor analyzes the artificial synthesis process and equipment application of flake graphite in detail:

The device has two relatively rotatable annular regular semicircular grooves, or two relatively rotatable annular non-regular semicircular grooves, and fixing one of the annular grooves is a fixed annular groove. , the fixed annular groove is engraved with a feeding hole; the other annular groove is connected with the power, so that the power can drive it to rotate, it is a movable annular groove, and the movable annular groove is engraved with a discharge hole, and the fixed annular groove is The gap with the movable annular groove is adjustable; when the two annular grooves are matched for rotation or stationary, the cross-section of the two grooves at any point is a perfect circle or a non-perfect circle, and in the middle of the two annular grooves, There are corresponding perfect circular or non-circular marbles. When the two annular grooves rotate relative to each other, the marbles can roll along the grooves in the grooves. This production process has the following shortcomings:

1. After the graphite ore is ball-milled, the natural flake graphite in the ore is ground, so it cannot protect the natural larger flake graphite.

2. The large flake graphite is ground, and the number of widely used large flake graphite is greatly reduced, resulting in a lot of waste.

The synthesis process is completed by using the above-mentioned equipment to input the graphite powder into the groove from the feed hole of the fixed annular groove, the power drives the movable annular groove to rotate, and the graphite powder is spun by the marble and the groove wall in the annular groove. And friction with the marble and the groove wall, so the temperature of the graphite powder increases. Under the action of spinning and temperature, the graphite powder is synthesized into large flake graphite, thereby realizing the purpose of synthesis.